POWDER OVENS
PRECISION POWDER FINISHING
AT THE SPEED OF IR.
Prime Heatβs Halogen Short-Wave IR Powder Ovens cure coatings in just 10 minutesβup to 70% faster than traditional systemsβwhile cutting energy use in half. With instant heat activation, zero carbon emissions, and precision curing that eliminates defects, our ovens ensure a flawless, high-quality finish every time.
POWDER OVENS
Prime Heatβs Powder Ovens use Halogen ShortWave Infrared (IR) technology to deliver a faster, more efficient, and more precise curing process. Halogen Short-Wave IR technology cures from the inside out, providing unmatched efficiency, precision, and energy savings. Traditional powder ovens heat from the outside in, which can result in slow, inefficient curing and potential quality issues.
- Halogen Short-Wave Infrared (IR) Technology
- Rapid Heat-Up: Reaches 350-400Β°F in seconds for faster production.
- Booster Oven Capability: Ideal for preheating parts before entering a gas convection oven.
- Flexible Batch Design: Available with Sliding Walls to accommodate different product sizes.
- Gas-Free Operation: No gas convection required, reducing energy costs and emissions.
- Ultra-Fast Curing: Powder coat fully cured in just 10 minutes.
Power Oven with Sliding Curing Walls available
PRODUCT DETAILS
Halogen Short-Wave Infrared (IR) technology is the gold standard for high-speed, energy-efficient curing in industrial finishes. Unlike traditional gas convection systems that rely on heating the surrounding air, Halogen IR delivers direct, instant heat to the productβs surfaceβreaching full operating temperature in just one second. This allows for cure times up to 5X faster, reducing production bottlenecks and maximizing throughput. Its precise temperature control (Β±3Β°F) ensures consistent, high-quality finishes without the risk of over-curing or defects. Additionally, Halogen IR converts 95% of its energy into usable heat, cutting energy costs by up to 50% while producing zero carbon emissions. The result? Faster curing, lower operating costs, and flawless finishesβevery time.
β Instant Heat Activation β Reaches 350-400Β°F in seconds vs. traditional ovens that require 10β20 minutes of preheating.
β Cures Powder in Just 10 Minutes β Compared to 30β45 minutes in gas convection ovens, cutting cure times by up to 70%.
β Up to 500% faster curing times
β Direct Heat Transfer with No Air Movement β Unlike convection ovens that heat the air first, Short-Wave IR penetrates directly into the coating and substrate, ensuring an even, thorough cure.
β 50% Lower Energy Consumption β Short-Wave IR converts 95% of energy into usable heat, making it far more efficient than gas-powered systems.
β Zero Carbon Emissions β No gas combustion, no VOCs, no hazardous byproductsβa cleaner, safer workplace.
β No Preheating Required β Short-Wave IR is activated instantly, meaning no wasted energy between production runs.
β Perfect for Phased Production β Works as a standalone system or as a supplementary heat boost between coating lines.
β Β Customizable Batch OvenΒ Designs β Available in multiple sizes, with Sliding Wall Designs and Compact Oven Designs.
Prime Heatβs Halogen Short-Wave IR Powder Ovens with Sliding Curing Doors cure coatings in just 10 minutesβup to 70% faster than traditional systemsβwhile cutting energy use in half. With instant heat activation, zero carbon emissions, and precision curing that eliminates defects, our ovens ensure a flawless, high-quality finish every time.
No Text
No Text
No Text
No Text
No Text
No Text
STANDARD HALOGEN IR POWDER OVEN vs POWDER OVEN SLIDING CURING WALLS
POWDER OVENS WITH
SLIDING CURING WALLS
Prime Heatβs new Powder Oven with Sliding Curing Walls combines our signature Halogen IR speed with a breakthrough in heat control. By locking in and stabilizing the curing zone, these ovens minimize thermal loss, eliminate reheat cycles, and ensure ο¬awless ο¬nishesβevery time. Perfect for high-mix environments and facilities where consistency, speed, and space matter most.
- Halogen Short-Wave Infrared (IR) Technology
- Cures Powder Coatings in ~5β10 Minutes Instead of 20+ Minutes
- Eliminates Heat Loss, Maintaining a Consistent Cure Temperature
- Reduces Part Rejects & Improves Coating Adhesion with Uniform Heating
- Speeds Up Production by Minimizing Downtime Between Batches
- Optimizes Energy Use by Reducing Reheating Cycles
PRODUCT DETAILS
1. Locked-In Thermal Environment
While all Prime Heat powder ovens use Halogen IR for lightning-fast, even heating, the new Sliding Curing Walls add a critical layer of control. These walls trap and stabilize heat inside the oven zoneβeliminating escape loss and ensuring uniform thermal consistency throughout the batch.
2. Zero Reheat Downtime
Most ovensβeven high-efficiency onesβlose heat when doors open or when batches shift. These sliding walls seal in the active heat zone, so there’s no cooling between loads. That means you can run back-to-back cycles without delayβmaximizing throughput and cutting total cycle time.
3. Adaptive for Space-Constrained or High-Turnover Environments Sliding Curing Walls are ideal for:
- Smaller to mid-sized operations where heat loss would impact finish quality
- High-throughput shops needing repeatable curing zones (like metalnfab or custom powder coaters)
- Workflows with varied part sizesβthe walls adapt around them to keep heat focused only where needed.
Prime Heatβs Halogen Short-Wave IR Powder Ovens with Sliding Curing Doors cure coatings in just 10 minutesβup to 70% faster than traditional systemsβwhile cutting energy use in half. With instant heat activation, zero carbon emissions, and precision curing that eliminates defects, our ovens ensure a flawless, high-quality finish every time.
No Text
No Text
No Text
No Text
No Text
No Text
STANDARD HALOGEN IR POWDER OVEN vs POWDER OVEN SLIDING CURING WALLS
PRODUCT DETAILS
Meet PowerCart, the intelligent conveyor system engineered to revolutionize your finishing line with smart, independent operation and unmatched flexibility. Unlike traditional chain-driven systems that are limited by fixed speeds and bottlenecks, PowerCart moves autonomously, adapting in realtime to your production flow. Each cart operates independentlyβno chains, no rails, no restrictionsβgiving you the freedom to optimize efficiency, eliminate bottlenecking,, and achieve precision control over every part of your process. Magnet-controlled positioning ensures carts stop exactly where needed, while instant stop functionality allows workers to pause individual carts without disrupting the entire line.
itβs built for the future
Fully programmable to your workflow, PowerCart integrates seamlessly with robotic systems and HalCon Tunnels, creating a fully automated, connected finishing ecosystem. With 360Β° rotating tabletops for optimal spray positioning, real-time performance tracking, and on-the-go charging, PowerCart keeps your production running smoothly, safely, and efficiently. Plus, its explosion-proof design (Class 1, Division 1) makes it safe for hazardous environments, while its compact footprint maximizes factory space. This isnβt just a conveyor systemβitβs the brain of your finishing line
POWDER OVEN WITH SLIDING CURING WALLS.
CONSISTENT INTERNAL TEMPERATURES=MORE EFFICIENT CURING
POWDER OVEN
UNLIMITED FLEXIBILITY & MAXIMUM THROUGHPUT
POWDER OVEN
INSTANT ON & INSTANT OFF.